Mitutoyo ABSOLUTE Super Caliper SERIES 500-No battery or origin reset needed

Mitutoyo ABSOLUTE Super Caliper SERIES 500-No battery or origin reset needed

Mitutoyo's Absolute Solar Digimatic Caliper retains its origin point even if the display turns off for the entire life of the caliper. At 60 Lux and up the ABSOLUTE solar caliper is, turned on ready to start measurement.

• No more repeated zero setting caused by the shortage of light intensity.
• Hard-coated solar panel for safe operation.
• No fear for overspeed errors.
• With thumb roller.
• Supplied in fitted plastic case.

The minimum illumination required in the uncharged state is 60 lux. As shown in the table ‘JIS Z 9110 Artificial Illumination Intensity Standard’, this Super Caliper can be used without problems in a normal work environment. The charge function allows the operator to use this Super Caliper without interrupting work even if the ambient illumination is temporarily insufficient. In the fully charged state this SuperCaliper can operate for approximately an hour in an environment of 50lux illumination (less than the minimum necessary illumination intensity). The time necessary for full charge differs, depending on the charging conditions. If this Super Caliper is left unused in an illumination of 500 lux (usual for manufacturing environments), it takes approximately one hour to reach full charge.

Built-in ABS (absolute) scale means that these calipers are ready to use immediately after power-on without origin resetting. It’s as easy as vernier caliper measurements.

Repeatability: 0.01mm / .0005”

Display: LCD

Length standard: ABSOLUTE electrostatic capacitance type linear encoder

Max. response speed: Unlimited

Battery: Solar battery*

*Can be used continuously above 60 lux ambient illumination.

Origin-set, Data hold, Data output, inch/mm conversion (inch/ mm models)

Alarm: Counting value composition error

Mitutoyo Caliper Catalog

Mitutoyo Solar Powered Caliper PDF