Mitutoyo Coolant Proof Micrometer Series 293 - with Dust/Water Protection Conforming to IP65 Level

Mitutoyo Coolant Proof Micrometer Series 293 - with Dust/Water Protection Conforming to IP65 Level

Level 6: Dust-proof. No ingress of dust allowed

Level 5: Protected against water jets. Water projected in jets against the enclosure from any direction shall have no harmful effects

Accuracy: Refer to the list of specifications.

Resolution: 0.001mm or .00005"/0.001mm

Flatness: 0.3µm/.000012”

Parallelism:

• 1µm/.00004” for models up to 50mm/2”
• 2µm/.00008” for models up to 100mm/4”
• 3µm/.00012” for models up to 175mm/7”
• 4µm/.00016” for models up to 275mm/11”
• 5µm/.0002” for models over 300mm/12”

Measuring faces: Carbide tipped

Display: LCD

Battery: SR44 (1 pc.), 938882

Battery life:

• Approx. 1.2 years under normal use
• (8 months: over 100mm models)

Dust/Water protection level: IP65

• Origin point setting (ABS measurement system) - Resets the ABS origin at the current spindle position to the minimum value of the measuring range and switches to ABS mode.
• Zero-setting (INC measurement system) - A brief press on the ZERO/ABS button sets display to zero at the current spindle position and switches to the incremental (INC) measuring mode. A longer press resets to the ABS measuring mode
• Hold - Pressing the HOLD button freezes the current value in the display. This function is useful for preserving a measurement in situations of poor visibility where the instrument must be moved away from the workpiece before the reading can be recorded.
• Data output - Models equipped with this function have an output port for transferring measurement data to a Statistical Process Control (SPC) system. *4: Only models with the data output function
• Auto power ON/OFF - The reading on the LCD disappears after this instrument is idle for about 20 minutes, but the reading and measurement mode are retained. Turning the spindle causes the reading to reappear.
• Error alarm: - In case of an overflow on the LCD or a computing error, an error message appears on the LCD, and the measuring function stops. This prevents an instrument from giving an erroneous reading. Also, when the battery voltage drops to a certain level, the low-battery-voltage alarm annunciator appears well before the micrometer becomes unusable.
• Function lock - This function allows the ORIGIN (origin point setting) function and the ZERO (zero-setting ) function to be locked to prevent these points being reset accidentally. *5: All-digit preset type only

Mitutoyo Micrometers Catalog

Mitutoyo Coolant Proof Micrometers